Archive | Blog

Contractors and Supervisors Fined $126,000 Total after Worker Injured

Feb 5th, 2012No Comments

Excerpt from the Ontario Government’s ‘Newsroom’

Rosati Construction Inc. of Windsor and supervisor Matteo Romano were fined $60,000 and $3,000 respectively on May 20 for violations under the Occupational Health and Safety Act (OHSA) after a worker was injured.

Keller Roofing & Sheet Metal Inc. of Exeter and supervisor Joseph Gower were also fined $60,000 and $3,000 respectively on March 25 in the same matter.

On July 29, 2008, a Keller worker was injured after falling through an opening in a roof at a construction project at 4025 White Oak Rd., London. The worker fell about six metres onto a gravel pile.

A Ministry of Labour investigation found that the worker had no fall protection after plywood used to cover the opening had been removed.

Constructor Rosati Construction Inc., employer Keller Roofing & Sheet Metal Inc. and supervisors Matteo Romano and Joseph Gower pleaded guilty to failing to ensure that the worker was adequately protected from falling while the plywood covering was removed temporarily from the opening in the roof.

The fines were imposed by Justice of the Peace Robert Gay. In addition to the fines, the court imposed a 25-per-cent victim fine surcharge, as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime.

The law(s) broken

The constructor, Rosati Construction Inc. out of Windsor and Keller Roofing, along with the supervisors from both companies, was charged with violating section 26.3(3) which states,

“The guardrail system or protective covering required under subsection (1) or (2) may be removed temporarily to perform work in or around the opening if a worker is adequately protected and signs are posted in accordance with subsections 44(1) and (2).”

Fall Protection, what is it all about? ‘Fall Protection’ covers the recognition of all fall hazards and ensure that all workers are adequately protected. Fall Protection is divided into two categories;

1) Fall Prevention
2) Fall Arrest

‘Fall Prevention’ covers all kinds of things such as;

a) Guardrails
b) Floor covers

When ‘Fall Prevention’ is not feasible then ‘Fall Arrest’ is required. ‘Fall Arrest’ covers such things as;

1) Body harnesses
2) Retractables or ‘Fall Limiters’
3) Shock-absorbing lanyards
4) Lifelines and rope grabs for ‘Fall Restraint’ systems

HRS Group Inc., created a 7 part miniseries concerning the Ontario ‘construction’ regulation 213/91 version of ‘Fall Protection’. Please read the appropriate blog postings that cover ‘Fall Protection’ and incorporate the information into your companies ‘Fall Protection’ program.

It is too bad that Rosati Construction Inc. and Keller Roofing failed the employee and didn’t ensure his safety. A safe workplace is a productive workplace.

The MOL is working diligently to ensure that ALL workplaces are safe places. Companies not understanding their responsibilities drive the costs of healthcare sky high and we all are affected by the increases. I do hope my blogs do not fall on deaf ears and people take away any information I have created to help them with the health and safety policies in their particular workplace.

Health and safety in the workplace is not just a phrase but a frame of mind. If all employers would incorporate safety into the planning stages of the business, it is a proven fact that the company would be more productive as injuries would be down and lost time disruptions would be at a minimum, and productivity would be very manageable.

Remember – In Ontario, “ALL Accidents are Preventable”

‘Work’ and ‘Play’ safe.

Daniel L. Beal
VP & Senior Trainer
HRSGroup Inc.

Reg and Son Metal Inc., Fined $65,000 after Worker Injured

Jan 31st, 201213 Comments

Excerpt from the Government of Ontario’s ‘Newsroom’

Reg and Son Sheet Metal Inc. of Oakville was fined $65,000 for a violation under the Occupational Health and Safety Act (OHSA) after a worker was injured.

On June 14, 2007, a worker received arm and back injuries after falling through an opening in the roof of a construction project at 3001 Richelieu St., Clarence-Rockland. The worker was gathering roofing materials with a wheelbarrow, stepped backwards through an opening and fell about six metres.
(more…)

Giffels Design-Building Inc. Fined $145,000 after Worker Killed

Jan 30th, 20128 Comments

Excerpt from the Ontario Government’s ‘Newsroom’

Giffels Design-Building Inc., a Toronto-based designer and constructor, was fined $145,000 for a violation under the Occupational Health and Safety Act (OHSA) after a worker was killed.

On July 29, 2008, a worker died after falling through a floor opening at a construction project at 8020 Fifth Line, Halton Hills. The worker was on the mezzanine, stepped around a barrier of snow fencing and fell about eight metres.
(more…)

Page 5 of 25« First...«34567»1020...Last »